Linear Beam Detectors for Ware House and Halls/ for Heighty Installations.
The non-addressable reflective beam line-type smoke detector is suitable for connection to 2-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection control and indicating equipment that can accept non-addressable type detectors.The transceiver component has four selectable detection ranges, providing smoke detection over distances from 8 m to 100 m. Three sensitivity settings can be used to compensate for differences in installed environments.Automatic compensation adjusts for lens contamination, alignment drift, ambient light conditions and transmitted beam ageing. Operational parameters are set using a separate hand-held device manager.The non-addressable reflective beam line-type smoke detectors provide fire detection and alarm system designers with a Standards-compliant, economical smoke detector for high spaces and areas with complex ceilings where point-type smoke detectors may not be suitable due to environmental conditions.
Features
- Four selectable ranges provide smoke detection for distances from 8 m to 100 m at up to 14.5 m width measurement.
- Three selectable sensitivity settings possible.
- Single transceiver and separate reflector components good quality.
- Quiescent condition indicator best functionality.
- Automatic compensation for lens contamination.
- Self-diagnostics function monitors during internal faults
- Separate Alarm and Fault relay outputs as per standards.
- Easy to install and commission using device manager feature.
